51吃瓜网,北京朝阳热心吃瓜群众

We, ORITCRANES S&M Team (Service & Maintenance), with engineering experience, maintenance skill and crane know-how,are daily taking care of your each crane, which was made by either ORITCRANES or any others.

Our service engineers, who were well trained by Orit College, are 24 hours available for on call.

Fastest action, High Standard

S&M scope

GIT ( General Inspection & Testing)

Scheduled Service

Modernization

Spare Parts

24 Hours on call

---------------------------------------------------------

GIT (General Inspection & Testing)

We dispatch service engineer to site for preventative maintenance visit including normal inspection and testing, free for warranty period.

Scope of serve:

Check status of limit switch, horn, buffer

Inspect the rope for any signs of excessive wear such as kinking, crushing, cutting, bird-caging, corrosion, reducing diameter or any other unusual wear.

Check the rope for proper reeving, lubrication, and end connections

Visually inspect the load block and hook for excessive wear such as pending, twisting, cracks, grooves, or increased throat opening

Inspection external parts of the hoist, trolley frameworks, catwalks, handrails etc., for broken parts ,mis-alignments, broken welds, excessive wear, or any unusual conditions

Inspect the sheaves, drums, wheels, and bearings

Check entire unit for smoothness of operations and proper pendant identifications

Open control boxes and check all contactor s, relays, timers, etc., for proper operation, loose/broken connections, pitting

Inspect external motors, couplings and wiring for wear and deterioration. Check motor stators and windings for proper operations and wear

Check load brakes for excessive drift, unsafe lowing speed, out of adjustment, functional operation, improper lubricant used, lubricant condition, oil level

Inspect all equipment oil/lubricate levels and report any excessive leakage

Visually inspect all supports runways for general condition and properly installed safety equipment such as end stops, rail bolts/clips, anti-collision devices, etc.

Inspect main power supply system for collector shoe conditions, festoon conditions, etc., for signs of arcing or wear

In case we find any faulty parts and or safety discrepancies, our technician will immediately report to customer and bring them to the attention with our corrective solution.